NEKOTEK LOGO-white

innovative customizable reliable flexible modular creative

solutions for your sensing ideas

A few examples

WIRELESS LOAD MEASUREMENT
Torque/Tension or Compression

Minimum size, lightweight, readily mounted on shaft.

 

Senses torsion and axial load with extreme dynamic range (1/100,000 full scale).
Wireless data transmission at up to 32 ksps, and wireless or battery power.
PC interface via USB or Ethernet / PoE.
Embedded  microtelemetry with ultra-low power consumption.
APPLICATIONS
Ideal for monitoring rotating/moving parts  where it is not possible to use wires and slip rings:
  • Shaft torsion, axial force or other load monitoring
  • Predictive maintenance
  • Testing
  • System qualification
 
FIELDS OF APPLICATIONS
  • Power generators
  • Engines
  • Axles
  • Compressors and pumps
  • Geartrains
  • Mixers
  • CNC
  • Spindles
TECHNICAL SPECIFICATIONS
  • Compact and embeddable system: 8.89 mm x 17.15 mm telemetry & DAQ
  • Shim containing piezoresistive torsional / axial measurement system
  • Load measurement up to 31,250 sps, 24-bit data (configurable)
  • Low power usage: 1 mA at 2.8-18 V; at 18 V input it uses 0.025 mA
  • Power: wired or wireless
  • Max operating temperature: 125 °C
  • Max acceleration/rpm: 33,000 g / 22,500 rpm
  • Data output: USB or PoE
  • IoT interface: OPC UA / MQTT/ UDP / TCP, open source
  • Optional: SMA connector

VIBRATION / ACCELERATION MEASUREMENT SYSTEM

3-in-1 high-bandwidth vibration sensor, tri-axis accelerometer, and temperature sensor with wired or wireless data transmission.
A useful kit for vibration condition monitoring, especially in predictive maintenance.

APPLICATIONS
  • Condition Monitoring
  • Predictive maintenance
  • Electric Motors
  • Pumps
  • Bearing health
  • Belt drivers
  • Robotic Arms
  • Gear wear
TECHNICAL SPECIFICATIONS
  • Easy screw-in or magnetic base installation
  • Coolant and oil resistant
  • Wireless capable with sensor power injector
  • Built-in temperature sensor channel
  • IoT interface: OPC UA / MQTT/ UDP / TCP, open source

Omnidirectional vibration sensor

  • Sampling rate 41,667 kHz
  • Bandwidth 100 Hz-20 KHz
  • Resolution 24 bit
  • Sensitivity  10-3 g

Tri-axis accelerometer

  • Sampling rate 3,200 sps to 25,600 sps configurable
  • Bandwidth 0÷6,000 Hz +/- 3 dB or 0÷12,000 Hz +/- 6 dB
  • Sensitivity 10-3 g

HIGH TEMPERATURE DIGITAL PRESSURE & TEMPERATURE SENSOR

High temperature pressure sensor with digital interface. Non-invasive on pressure vessels, very small interface (M2).
Built-in digital conversion. High resolution and dynamic range, no need for data acquisition cards.
Easy single-wire SMA connection for power and data on a single, standard coaxial cable. Wireless data transmission with local power injection.
Built-in temperature sensor.
High temperature digital pressure and temperature sensor

 

TECHNICAL SPECIFICATIONS

 

  • Operating range 1): 0÷35 bar absolute / Pressure resolution < 1.5 mbar
  • Operating range 2): 0÷120 bar absolute / Pressure resolution < 6 mbar
  • Operating temperature: -40 ÷ +125 °C
  • Survives and performs at 140 °C
  • Temperature resolution < 0.01 °C
  • Sampling rate up to 2 ksps
  • IoT interface: OPC UA / MQTT/ UDP / TCP, open source
  • Coaxially powered or wireless option
  • Several stinger options available: M2, KF/NW 10 flange, 1/8” NPT
  • Housing: 316 stainless steel (304 for KF variant)

 

OPTIONS

 

  • ADC housing separation for enhanced temperature capability (200 °C): Ø 3.5 mm diaphragm stage with M2 interface
  • High data rate: 32 ksps telemetry or 256 ksps Ethernet
  • Very high temperature diaphragm(up to 600 °C)

WIRELESS MODULE RECEIVER
IoT interface

Digital Data Acquisition device (DAQ): receives wireless and wired digital signals for all sensors.

PC interface via USB or Ethernet / PoE.

Power and data to sensors via shielded, non-proprietary coaxial cable (SMA connector).

Wireless data communication with sensor: simply connect your antenna of choice to the SMA connection provided on the WMR and you’re ready to stream data to PC.

Wireless Module Receiver
TECHNICAL SPECIFICATIONS
  • +21 dBm transmit power
  • -80 dBm wireless receive sensitivity
  • DC power injection for digital coaxial telemetry
  • Compatible with all wireless module devices
  • USB and PoE options
  • IoT interface: OPC UA / MQTT/ UDP / TCP, open source
  • DIN Rail mounted case